top of page
6 micron Diamond Emulsion

6 micron Diamond Emulsion

35,00$Preis
 
 How to Use Diamond Emulsion for Knife Stropping
 
šŸ§° What You Need:
  • A leather strop, balsa strop, or MDF strop (dedicated to diamond spray/emulsion)
  • Diamond emulsion (commonly 1 micron, 0.5 micron, or even 0.25 micron)
  • Clean cloth or paper towel
  • Your knife, sharpened and burr-free
  •  
šŸ§¼ Step 1: Prep the Strop
  • Make sure the strop surface is clean and dry.
  • If itā€™s been used before, wipe off any old residue or recondition if needed.
 
šŸ’§ Step 2: Apply the Diamond Emulsion
  • Shake the bottle if necessary.
  • Apply a light, even mist or small drops across the stropping surface.
  • Spread it evenly with a finger (wear gloves) or a clean cloth.
  • Let it dry for a few minutes until it bonds to the surface.
 
Note: Donā€™t oversaturateā€”too much can clog the strop or waste the abrasive.
 
šŸ”Ŗ Step 3: Strop Your Knife
  • Lay the knife at the proper edge angle (15ā€“20Ā°).
  • With the edge trailing, draw the blade spine-first across the strop.
  • Use light pressure, and keep your stroke smooth and even.
  • Flip sides, and repeatā€”10 to 20 passes per side is usually enough.
šŸ“ Choosing the Right Grit
  • 1 micron (ā‰ˆ16,000 grit) ā€“ For polishing and finishing most edges
  • 0.5 micron (ā‰ˆ30,000 grit) ā€“ For mirror finish or straight razors
  • 0.25 micron and below ā€“ Ultra-fine finishing, often used on specialty steels
āš ļø Tips & Warnings
  • Dedicate one strop per grit to avoid contamination.
  • Diamond emulsions cut faster than traditional compoundsā€”go slow.
  • Donā€™t use on a soft leather strop unless itā€™s backed; too much give reduces control.
Anzahl
Nicht verfĆ¼gbar

  • Specs

    Diamond Emulsion  (6 micron) #3000 grit
    Size:

     

    Powered by Jende Industries (Taiwan)

     

  • RETURN & REFUND POLICY

    We accept return items. 

    You may return the unused item in its original packaging within 14 days.  The buyers will prepay shipping and handling back to us.  Refunds will be issued by the same form of payment we received.

    Please contact us before sending back any items. Please note that we may request you to email and provide the damaged or defective merchandise photos.  

     

  • SHIPPING INFO

     

    "We can sell and ship our products worldwide, including  USA, Canada, Western Europe.  The courier we are using will be DHL Express.

    Special note:

    • The customer is responsible for all fees and taxes - we charge only for our shipping costs.
    • Customer is responsible for knowing their laws and assumes all risk for the value of the package as well as our shipping costs, should it be confiscated at customs.
    • If the package is found to be undeliverable, the customer is responsible for the return shipping cost.
    • The customer must pay all return and replacement shipping costs.

  • Warranty

    Thank you for supporting Work Tuff Gear! We warranty each Work Tuff Gear knife against defects in material and workmanship for six months after purchase. We will repair or replace it with a new Work Tuff Gear knife (shipping fees and associated costs not included).  Of course, Work Tuff Gear does not warranty its products against normal wear or misuse. Work Tuff Gear knives are not intended to be used as hammers, chisels, pry bars, or screwdrivers. Although we thoroughly test our knives, our warranty does not cover damage due to impacts with rocks, bricks, metals, or other high-hardness objects.  If your knife was damaged due to misuse, our repair department can analyze and repair it for a reasonable fee (shipping fees and associated costs not included).  The warranty does not cover normal wear and tear, resharpening, reprofiling, damage caused by misuse, lack of regular maintenance, or disassembly.  Remember, anything can break or fail if subject to sufficient abuse. So please do not misuse this product.

    ā€‹

    Please send proof of your purchase order from our site or authorized dealers to claim the warranty.

     

    Email: sales@worktuffgear.com 

bottom of page