Lanzeta (NC)- SP/ (Bohler K329)- Briwn Rugged Scale Grip

"We can sell and ship our products worldwide, including  USA, Canada, Western Europe.  The courier we are using will be DHL Express.

Special note:

• The customer is responsible for all fees and taxes - we charge only for our shipping costs.
• Customer is responsible for knowing their laws and assumes all risk for the value of the package as well as our shipping costs, should it be confiscated at customs.
• If the package is found to be undeliverable, the customer is responsible for the return shipping cost.
• The customer must pay all return and replacement shipping costs.

Thank you for supporting Work Tuff Gear! We warranty each Work Tuff Gear knife against defects in material and workmanship for six months after purchase. We will repair or replace it with a new Work Tuff Gear knife (shipping fees and associated costs not included).  Of course, Work Tuff Gear does not warranty its products against normal wear or misuse. Work Tuff Gear knives are not intended to be used as hammers, chisels, pry bars, or screwdrivers. Although we thoroughly test our knives, our warranty does not cover damage due to impacts with rocks, bricks, metals, or other high-hardness objects.  If your knife was damaged due to misuse, our repair department can analyze and repair it for a reasonable fee (shipping fees and associated costs not included).  The warranty does not cover normal wear and tear, resharpening, reprofiling, damage caused by misuse, lack of regular maintenance, or disassembly.  Remember, anything can break or fail if subject to sufficient abuse. So please do not misuse this product.

​

Please send proof of your purchase order from our site or authorized dealers to claim the warranty.

Email: sales@worktuffgear.com 

Böhler K329 is a high-performance tool steel produced by Böhler, designed primarily for industrial applications but also gaining popularity in the knife-making community due to its excellent balance of toughness, wear resistance, and edge retention.

Key Characteristics:

• Steel Type: Medium-alloyed cold-work tool steel.

• Composition (approximate):

  • Carbon: ~1.5%

  • Chromium: ~12%

  • Molybdenum, Vanadium, and other alloying elements are present for enhanced wear resistance and hardenability.

• Hardness: Can be heat-treated to reach hardness levels suitable for demanding cutting applications (around 58–63 HRC).

• Toughness: Higher toughness compared to some high-wear steels, making it more resistant to chipping.

• Corrosion Resistance: Moderate — better than plain carbon steels, but not stainless; requires care to prevent rust in humid or corrosive environments.

• Wear Resistance: High — good for knives that see abrasive use or repeated impact.

Use in Knives:

K329 is valued in knife making for tools, outdoor knives, and hard-use blades where a combination of edge retention and toughness is needed. It’s not as commonly seen as steels like D2 or M390, but is respected by custom makers for its reliability and performance.

Steel Review: https://www.youtube.com/watch?v=OOzxlidZZ9E

Caring for a knife made from Böhler K329 steel is important to maintain its performance and prevent corrosion, especially since it is not fully stainless. Here are some key maintenance tips:

🔧 General Care Tips

• Clean After Use

  • Wipe the blade clean and dry immediately after use, especially after cutting acidic foods (e.g., citrus, tomatoes) or using the knife in wet or humid environments.

• Oil the Blade Regularly

  • Apply a light coat of food-safe mineral oil or a corrosion inhibitor (like WD-40 for tools) to prevent rust. This is especially important in high-humidity areas or if the knife will be stored for long periods.

• Avoid Dishwashers

  • Always wash the knife by hand. Dishwashers can cause corrosion and damage the handle or edge due to high heat and harsh detergents.

• Store Properly

  • Use a knife block, sheath, or magnetic strip. Avoid keeping it in a damp drawer or leather sheath long-term, as moisture can promote rust.

🔪 Sharpening and Edge Maintenance

• We recommend that you use the leather strop system to keep it razor sharp.

🌧️ Special Considerations for Outdoor Use

If using the knife for camping, bushcraft, or other rugged tasks:

• Dry and oil it promptly after exposure to moisture (rain, dew, wet wood).

• Consider applying a patina (deliberate oxidation using vinegar or mustard) to improve rust resistance.

PRODUCT INFO

Knife Type

Fixed Blade

Knife construction

Full tang

Overall Length

13.8"

Blade Length

8.5"

Cutting Edge

8.4"

Blade Thickness

0.23"

Type of grind

Saber grind with the convex edge

Blade Shape

Tracker Bowie

Blade Steel

Bohler K329 (59-60RC)

Blade Finish

Handle Material

G10 (hand applied rugged texture)

Knife Weight

18.3oz

Weight w/ Sheath

22.7 oz

Sheath Included

Yes

Sheath Material

Handmade Kydex with custom belt loop.